Display units (6107, 6112, 6807) have a software called ApplicationLoader. ApplicationLoader enables you to make multiple device configurations such as updating application software, setup communications, clear device memory and see device information.
To enter ApplicationLoader:
6107 display unit: Boot-up the display unit and press the lower right corner of the display during boot-up until the embedded ApplicationLoader software starts.
6112 and 6807 display unit: Boot-up the display unit and rub the lower right corner of the display during boot-up until the embedded ApplicationLoader software starts.
Main view in ApplicationLoader:
Update Software view
Communication Setup view
Version Info view
Maintenance view
Display Settings view
Set a color theme for ApplicationLoader (see instructions below)
ApplicationLoader has a highlight color used for example as a title background. By default the highlight color is blue. The color can be changed using color customization.
To configure color customization:
Navigate to Display Settings view:
Set Color customization mode to Default (blue) or Manual color value
If Manual mode is selected, set values for red (R), green (G) and blue (B). Value range for each color is 0-255. Color sample box shows a preview of the color.
Tap Save to apply the changes
Return to main view by tapping 
in the lower left corner.
To quit ApplicationLoader:
1. Navigate to Main view
2. Tap 
on the lower left corner
3. Confirmation pop-up appears. Confirm by tapping Quit.
4. ApplicationLoader quits and the system runs the application or CODESYS Visualization.
See also sections:
Source file topic100339.htm
Last updated 19-Dec-2024