Configuring Display Brightness (6107, 6112, 6807)

To configure display brightness manually:

1. 6107 display unit: Boot-up the display unit and press the lower right corner of the display during boot-up until the embedded ApplicationLoader software starts.
   6112 and 6807 display unit: Boot-up the display unit and rub the lower right corner of the display during boot-up until the embedded ApplicationLoader software starts.

2. Navigate to Display Settings view:
   

3. Select Main Display Configuration tab

4. Set a value from 0 to 15. Value 15 is the brightest. Set the value by tapping the + or – icon or tap the value to open a virtual numeric keypad.

5. Changes are saved automatically

Return to main view by tapping in the lower left corner.

To control the display brightness in application, use 6000BackLightControl library.