Supported platforms: CODESYS 3.5, CODESYS 3.5 SAFETY
The library contains POUs for diagnosing S series hardware voltages, currents and temperature.
1.5.2.0
SC52: 1.5.2.0
SL84: 1.3.2.7
|
Library version |
Manual version in release |
|
1.5.2.0 |
MTC 7.9 |
|
1.4.1.0 |
SDK 4.2 |
|
1.4.0.0 |
SDK 4.1 |
|
1.3.2.7 |
SDK 3.9 |
|
1.3.2.6 |
SDK 3.8 |
|
1.2.1.1 |
SDK 3.6 |
|
1.1.0.1 |
SDK 3.2 |
|
1.0.5.1 |
SDK 2.9 |
For more details, see Epec extranet for product specific changelog(s).
Library Version 1.3.2.6 or newerLibrary Version 1.3.2.6 or newer
|
POU |
Description |
|
S_DOControlAndDiagnostics (FB) |
Diagnoses a sourcing DO by measured output current and overcurrent protection status. |
|
S_DOGNDControlAndDiagnostics (FB) |
Diagnoses a sinking DO_GND with a digital input status. |
|
S_DOValveEcoControlAndDiagnostics (FB) |
Controls DO valves more economic with PWM signal. |
|
S_AIOverCurrentProtection (FB) |
Used for protection of a current mode input from overcurrent. |
|
S_RefControlAndDiagnostics (FB) |
Diagnoses and controls reference voltage outputs. |
|
S_OutputGroupControlAndDiagnostics (FB) |
Monitors supply voltage and diagnoses safety switch faults. |
|
S_InternalTempMonitoring (FB) |
Monitors internal temperature of the controller. |
|
S_SC52_Diagnostic (PRG) |
Combined diagnostic program for SC52 unit. |
|
S_EC44_Diagnostic (PRG) |
Combined diagnostic program for EC44 unit. |
|
S_SL84_Diagnostic (PRG) |
Combined diagnostic program for EL84 unit. |
|
S_SC10_Diagnostic (PRG) |
Combined diagnostic program for SC10 unit. |
Library Version 1.2.1.1Library Version 1.2.1.1
|
POU |
Description |
|
S_DOControlAndDiagnostics (FB) |
Diagnoses a sourcing DO by measured output current and overcurrent protection status. |
|
S_DOValveEcoControlAndDiagnostics (FB) |
Controls DO valves more economic with PWM signal. |
|
S_AIOverCurrentProtection (FB) |
Used for protection of a current mode input from overcurrent. |
|
S_RefControlAndDiagnostics (FB) |
Diagnoses and controls reference voltage outputs. |
|
S_OutputGroupControlAndDiagnostics (FB) |
Monitors supply voltage and diagnoses safety switch faults. |
|
S_InternalTempMonitoring (FB) |
Monitors internal temperature of the controller. |
|
S_SC52_Diagnostic (PRG) |
Combined diagnostic program for SC52 unit. |
|
S_EC44_Diagnostic (PRG) |
Combined diagnostic program for EC44 unit. |
Unit specific internal library
Diagnostic interface library
Safe conversion library
Safe data validation library
Safe sensor calibration library
SSeriesSystemExt library
SafeSSeriesIoDriverExt library
To see library dependencies with MultiTool Creator, see section Using Libraries with MultiTool Creator.
Source file topic100442.htm
Last updated 19-Dec-2024