The easiest way to update firmware is to use Epec CANmoon software (available in Epec extranet). For more information, refer to CANmoon manual.
|
|
The easiest way to update firmware is to use Epec CANmoon software (available in Epec extranet). For more information, refer to CANmoon manual. |
|
|
Power reset the control unit after firmware update. |
|
|
When the control unit starts up after update, the LED light (if supported in HW) flashes red and green alternately as an indicator that the new firmware is taken into use. The first boot-up after downloading the new firmware can take 10-20 seconds. |
|
|
Answer format depends on the FW version.
|
To check the current firmware version, read index 100Ah.
For more information, refer to
For more information, refer to
For more information, refer to
Epec Rescue Software for 6000 series User Manual (available from Epec's extranet)
For more information, refer to
For more information, refer to
Source file topic000754.htm
Last updated 4-Sep-2025