The maximum continuous current per pin is 6 A.
|
|
The maximum continuous current per pin is 6 A. |
|
|
The power for sensors, encoders and other equipment should be supplied from the very same unit that the equipment is connected to, to ensure the best performance of the system. No external power (or ground) connections are allowed. |
The nominal operating voltage for Epec control units is 12 and 24 VDC. The full operating range is 8,4…36 VDC
See section Power Supply for accurate pin allocation of the connectors
Single point grounding should be used for power supply for all the control units
The type and parameters of the power supply fuse should be selected depending on the machine type and product use case
Power supply’s wiring example:
|
|
In all European Community countries, the emergency stop should be implemented in accordance with standard EN ISO 13850, which complies to the EC Machinery directive 2006/42/EC. In other countries, the emergency stop should be implemented according to local standards and/or to local legislation. |
