Processor |
32 bit CPU, 200 MHz
|
|
Memory |
Flash memory with ECC: total 8 Mbyte RAM memory with ECC: 512 kbyte (128 kbyte safe/100 kbyte non-safe for PLCopen application variables) Non-volatile memory: 8 kbyte
PLCopen application size up to 1024 kbyte
|
|
Power |
Nominal supply voltage 12/24 VDC systems (9 ... 34 VDC) Idle power consumption 3,2 W (+24 VDC, no external load) Undervoltage reset 5,2 V Overvoltage protection typical 38...70 VDC (transient 123 V) |
|
REF voltage outputs |
+5 V (switched on/off by application)
|
|
Diagnostics |
Signal LED (green/red/blue) Supply voltage Unit temperature REF voltage monitoring Internal voltage monitoring Software cycle time Error logging
|
|
Protection functions |
Overvoltage protection Short-circuit protection for outputs
|
|
Programming |
CODESYS 3.5 SP10
|
|
Software installation |
Download via CAN1
|
|
Protection class |
IP67
|
|
Size / Outer dimensions |
224,8
x 148,5 x 50 mm
|
|
Weight |
0,95
kg
|
|
Case material |
Aluminum / plastic
|
|
Operating temperature |
-40...
+85°C
|
|
Storage temperature |
-40...
+85°C
|
|
Connectors |
1 x AMP35 (black)
|
|
Communications / Interfaces |
2 x CAN 2.0 B
|
|
REF pins total |
2 |
|
GND pins total |
5 |
|
I/O pins total |
22 |
|
Outputs |
8 x
|
PWM/DO with
high side current measurement up to (sourcing, up to 2,5 A, PWM frequency by application) |
Inputs |
5 x |
AI/DI (0-10 V / 0-22 mA selection by application) |
5 x |
AI/DI (CAT2) (0-5 V / 0-10 V / 0-22 mA selection by application) |
|
4 x |
AI/DI/PI (AI 0-5 V, pull-up / pull-down selection by application) (DI pull-down) (PI pull-up / pull-down selection by application) |
|