Processor |
32-bit CPU, 128 MHz
|
|
Memory |
4 MByte hardware version: Flash 8 MByte (1 MByte for PLCopen application) RAM 4 MByte (256 kByte for PLCopen application variables) NVRAM 512 kByte (for error logs, system parameters)
8 MByte hardware version: Flash 8 MByte (3 MByte for PLCopen application) RAM 8 MByte (1 MByte for PLCopen application variables) NVRAM 512 kByte (for error logs, system parameters)
|
|
Power |
Nominal supply voltage 12/24 VDC systems (8,3 ... 36 VDC), Idle power consumption 2,2 W Undervoltage reset 7,5 V Control unit shut down voltage typical 43 V Overvoltage protection from 43 to 97,5 V
|
|
REF voltage outputs |
+5 V, +10 V
|
|
Diagnostics |
Signal
LED (green/red)
|
|
Programming |
4 MByte hardware version: CODESYS 2.3, Application size 1 MByte 8 MByte hardware version: CODESYS 2.3, Application size 3 MByte
|
|
Software installation |
Download to flash memory via CAN1 or Ethernet
|
|
Protection class |
IP67
|
|
Size / Outer dimensions |
224,8 x 148,5 x 50 mm 8.819 x 5.827 x 1.969 in
|
|
Weight |
0,95
kg
|
|
Case material |
Aluminum / plastic
|
|
Operating temperature |
-40...
+85 °C
|
|
Storage temperature |
-40...
+85 °C
|
|
Connectors |
3 x AMP35 (connector 1 grey, connector 2 black, connector 3 blue)
|
|
Communications/ Interfaces |
4
x CAN 2.0 B,
|
|
I/O pins total |
65
|
|
Outputs |
12 |
PWM/DO/DI
with high side current measurement up to
|
8 |
PWM/DO/DI
with high side current measurement up to
|
|
4 |
PWM/DO/DI
up to 2,5 A, PWM frequency by application,
|
|
4 |
PWM/DO/DI
up to 4 A, PWM frequency by application,
|
|
4 |
DO/DI sinking up to 3 A
|
|
Inputs |
11 |
DI/AI
0-10 V / 0-22 mA selection by application,
|
4 |
DI/PI
5/10 V, threshold selection by application,
|
|
14 |
DI/PI pull-up/pull-down selection by application
|
|
4 |
DI/PI pull-down to GND
|
|