|
In ISOBUS control systems the control unit must be connected to the ISOBUS wire harness' ECU_PWR and ECU_GND pins. Actuator power pins (PWR and GND) cannot be used. |
Epec 3606 has passed hardware tests of AEF Conformance Test revision 3/2017.
AEF approval is valid for HW revision C19 when the CAN sample point value is set to 80%. Sample point configuration requires FW version 1.170 or newer and 3000ext.lib version 1.3.0 or newer.
|
In ISOBUS control systems the control unit must be connected to the ISOBUS wire harness' ECU_PWR and ECU_GND pins. Actuator power pins (PWR and GND) cannot be used. |
