This library is Epec 5050 specific.
Supported platforms: CODESYS 2.3, CODESYS 3.5
This library provides hardware specific data.
|
|
This library is Epec 5050 specific. |
The library's scaling data is used by the following libraries:
ADConversion library
5050Specific library (only with CODESYS 2.3)
JoystickCalibrationAndDiagnostic library
ProportionalValveControl library
SensorCalibrationAndDiagnostic library
To see library dependencies with MultiTool Creator, see section Using Libraries with MultiTool .
Source file Topic000376.htm
Last updated 21-Feb-2025